In the manufacture of tablets may be used the following materials and Technology: Plastic PVC in different colors with thickness from 1 mm to 10 mm with drawing images using self-adhesive vinyl films, application of various shades, as well as a film with full-color printing. anodized aluminum or stamped self-adhesive vinyl applique films varied ootenkov. Double-layer metallized plastic with a thickness of 1.5 to 3 mm with drawing images using a mechanical or laser engraving. pvc plastic, Plexiglas or aluminum with the application of silk screen printing (serigraphy). Metal (brass) with a thickness of 2 to 10 mm with chemical etching and then filling the etched enamel picture different colors.

Sixth: How much will your sign? The cost of making your signs affect the following parameters: area of plate manufactured materials that will be used for manufacturing, method of applying the information to the plate, method of attachment plates to the surface (wall, door), the number of plates in the order. The cheapest and simplest in the manufacture of tablets are made of plastic PVC with applique self-adhesive film. They are easy to manufacture and can be used both indoors and outdoors. They are little affected by external factors such as sun, snow, frost and humidity. At low cost they do not have a presentable appearance.

More expensive, but having a very presentable appearance, are the plates made of metal with the application of information by application of adhesive films. They can be used on the street and inside buildings. Even more expensive plates are signs stamped on the metal. And finally, the most expensive – it's plate, made of brass and duralumin. After clarification of the above questions, you have to decide on a technology of tablets should stay and what material to use. You can always see samples of finished plates in our office or website. And also to get preliminary calculation of the cost of manufacturing and order the sign or signboard.